WALI Speaker Wall Mounts, Bookshelf Speaker Wall Mount Brackets, Surround Sound Speaker Mounts, Hold up to 7.7 lbs, (SWM602), 5 Pack, Black (Black, 5 Pack)

The media could not be loaded.  The mounts are sturdy and functional, a great value for money. Unfortunately, for those with Logitech Z906, you will have to drill a new hole about an inch below the lower hole in each mount, so that the bottom part of the mount surface doesn't block the speaker connectors, thus allowing you to fit the wires through.This workaround is relatively easy to perform on the four corner sattelite speakers, but the central speaker was a bit of a hassle, as it's placed horizontally, and the distance between the wall mounting hole and the connectors is shorter than the other four speakers. What I did was, I placed the mount surface on the speaker, secured it with the screw, but not too tight. Then I turned the speaker vertically to expose the connectors, fit the wires, held them against the speaker surface with some electrical tape, and carefully twisted the speaker and mount back to its original position. It wasn't easy, but I managed.I'm still wondering why Logitech didn't include wall mounts or at least sponsor a wall mount company to produce specific Z906 wall mounts. I also own the Logitech Z5500, which came stock with the mounts, which unfortunately are not compatible with the Z906 speakers.

Perfect for what I needed but lacking enough wall anchors and screws for them. Had spare lying around so.

As previously mentioned the mounts are plastic but they seem sturdy enough. Especially for the price. My one complaint is with the included hardware. The included screws did not fit my speakers, luckily I hoard screws so I had some on hand. 1/4 - 20 worked fine, I had seen mentioned that people had to drill out the holes for the larger screw but I didn’t have that issue. The mounting screws I didn’t use as they were barely long enough to get through the drywall to the stud. Again used something I had on hand. Mounts themselves seem fine though.

The included hardware is perfect for the installation and fit/hold the Roku speakers perfectly. As long as the plastic doesn't fatigue over time, I'm sure the mounts will be just fine. the price is perfect as well!

Funcionan perfecto para los parlantes de mi Z906

Absolutely love the speaker mounts love them very sturdy and they secure my speakers very well streamlined easy to install when I need more I’ll buy more lover

It works but don't have much adjustment compared to others I'm currently using.

Can't ask for any more. I'm pretty sure my speakers weight close to 10 lbs each and these have been holding for 2 year now. Great value for what they do.

Me funcionó muy bien con mis bocinas El material es resistente Aunque es de plástico pero cumple con su propósito

So if you own that system then these are the mounts you want only problem is the screws you need for those speakers are larger in diamiter then the openings on the mounts to go through. So you need a drill to open it up a little to get them through. I used the( Brass Thumb Screw, Knurled Head, 0.5" Length, Fully Threaded, 1/4"-20 UNC Threads, Made in US ) screws. and its just what I wanted

Cumple lo que promete por completo.Respecto a su resistencia brinda un buen soporte, es fácil de instalar y es bastante discreto.

good quality but the threads on most speakers is 6mm not the 5 mm that wali suppliesother than that - love them

Looks great